Stunning domestic gates installed in Marlborough, by Shire Gate Co
Overview
Our winner for this month’s ‘Proper Job’ install has been awarded to Shire Gate Co, a family-run business based in Andover, Hampshire. Shire Gate Co has over 28 years of combined industry experience, and are specialists in delivering bespoke gate design, installation, and maintenance. Renowned for adding elegance and luxury to the front of their client’s properties, the installation that caught our eye, was installed in Burbage, Marlborough.
The end user had a set of existing wooden swing gates; however, they were tired of manually opening and closing them. They were keen to get new automated swing gates installed for ease and added security. Shire Gate Co absolutely delivered, upgrading the entrance to include higher fence panels, on either side of brand-new automated swing gates with GSM intercom access control.
Challenges
Every installation has its challenges and with this particular project, Shire Gate Co had to adjust the levels of the driveway to allow minimal gap underneath the gates whilst catering for the rise which was approx. 200mm. The image below showcases the use of a non-reducing hinge design, which were bespoke to the gates, to deliver superior strength and structure. The non-reducing hinge is also a feature of Shire Gate Co’s gate safety responsibilities, using design to reduce a safety hazard that has been identified. However due to the thickness of the timber, Shire Gate Co felt that a safety risk was still present, so they installed a safety edge for additional protection.
Automation
The client decided they wanted underground motors for a tidy and smart installation. The underground motors offered a conspicuous automation system to enhance the aesthetics of the gate design. Shire Gate Co selected the Benincà DU.IT24NVE underground gate operator, ideally suited for gate leaf’s up to a length of 3.5 metres. They then installed an Optimus E1K GSM Intercom with its sleek single button and keypad, this can be seen in the image below. As photocell’s were not suitable for the rear swing zone, Shire Gates decided to install 2x LD100 ground loop detectors to cover the swing zone and protect it from vehicles, using photocells for the outside and adding GF15.25 safety edges on the hinge gaps.
Conclusion
Whilst delivering a bespoke entrance that meets the customer’s needs aesthetically, Shire Gate Co have also installed a safe gate system. The image below shows the use of an enclosure with isolated mains supply with correct and thorough electrical safety notices. There is also a UKCA mark on the control unit in compliance with current gate safety regulations. Shire Gate Co also provided a thorough and detailed handover of the gate system to the client and left the gate owners a formal handover document with DOC certification and an OEM manual of the gate system.
Well done Shire Gate Co for this fantastic install and for winning our September Benincà ‘Proper Job’ Install.
Shire Gate Co specialise in the following:
- Hardwood and Softwood Gates
- Steel & Aluminium Gates
- Composite Gates
- Steel Framing Fabrication
- Design & Forging Gate Hinges
- Gate Automation & Access Control
- All types of repairs, servicing and general maintenance
If you would like to find out any more information about Shire Gate Co or contact them, full details can be found via their website: www.shiregateco.com
